1. Manuals
  2. Brands
  3. Panasonic Manuals
  4. Cordless Telephone
  5. KX-TGF372AZ
  6. Operating instructions manual

Panasonic KX-TGF372AZ Operating Instructions Manual

Link-to-mobile bluetooth convergence solution
Hide thumbs Also See for KX-TGF372AZ:
Table of Contents

Advertisement

Quick Links

Link-to-Mobile Bluetooth Convergence Solution
Before initial use, see "Getting Started"
on page 10.
Thank you for purchasing a Panasonic product.
Please read these operating instructions before using the unit and save them for
future reference.
To use this unit in your country, first change the unit's region setting to match
your country (page 51).
TGF372AZ(en)_0519_ver003.pdf

Operating Instructions

Model No.
1
KX-TGF372AZ
2015/05/19
9:28:42

Advertisement

Table of Contents
loading

Related Manuals for Panasonic KX-TGF372AZ

Summary of Contents for Panasonic KX-TGF372AZ

  • Page 1: Operating Instructions

    Model No. Before initial use, see “Getting Started” on page 10. Thank you for purchasing a Panasonic product. Please read these operating instructions before using the unit and save them for future reference. To use this unit in your country, first change the unit’s region setting to match your country (page 51).

  • Page 2: Table Of Contents

    Table of Contents Introduction Programming Accessory information ........3 Menu list .............39 Alarm ............47 Important Information Do not disturb mode ........48 For your safety ..........6 Baby monitor ..........49 General notices ..........7 Other programming ........51 Important safety instructions ......7 Registering a unit ........51 For best performance ........8 Caller ID Service Other information .........8...

  • Page 3: Introduction

    We recommend using Panasonic rechargeable batteries. By registering the key finder (4 max.) to a Panasonic Digital Cordless Phone and attaching it to an easy-to-lose item in advance, you can locate and find the mislaid item to which the key finder is attached.

  • Page 4: Expanding Your Phone System

    Introduction www.panasonic.net/pcc/products/telephone/p/tga20/ Please contact Panasonic or authorised sales department for availability of key finder in your area. Other information R Design and specifications are subject to change without notice. R The illustrations in these instructions may vary slightly from the actual product.
  • Page 5 R BlackBerry is owned by Research In Motion Limited and is registered in the United States and may be pending or registered in other countries. Panasonic is not endorsed, sponsored, affiliated with or otherwise authorised by Research In Motion Limited.

  • Page 6: Important Information

    Important Information R Do not allow the AC adaptor or telephone line cord to be excessively pulled, bent or For your safety placed under heavy objects. To prevent severe injury and loss of life/ Operating safeguards property, read this section carefully before using the product to ensure proper and safe R Unplug the product from power outlets operation of your product.

  • Page 7: General Notices

    Important Information R This product is unable to make calls when: R To minimise the possibility of lightning – the handset batteries need recharging or damage, when you know that a have failed. thunderstorm is coming, we recommend – there is a power failure. that you: –...

  • Page 8: For Best Performance

    R Operating the product near electrical Base unit location/avoiding noise appliances may cause interference. Move away from the electrical appliances. The base unit and other compatible Panasonic units use radio waves to communicate with Routine care each other. R For maximum coverage and noise-free...

  • Page 9: Specifications

    Important Information Information on Disposal in other Countries outside the European Union These symbols are only valid in the European Union. If you wish to discard these items, please contact your local authorities or dealer and ask for the correct method of disposal. Note for the battery removal procedure Refer to “Battery installation”...

  • Page 10: Getting Started Setting Up

    A DSL/ADSL filter (not supplied) is required if you have a DSL/ADSL service. Note: R Use only the supplied Panasonic AC adaptor PNLV226AL. R Use only the supplied telephone line cord. R Follow the directions on the display to set up the unit.
  • Page 11 However, during a mobile call, R Use the supplied rechargeable batteries. For replacement, we recommend using the is not displayed even though this Panasonic rechargeable batteries noted on feature is activated. page 3, 7. Note for battery charging R It is normal for the handset to feel warm during charging.

  • Page 12: Controls

    Getting Started n Control type Soft keys Controls By pressing a soft key, you can select the feature shown directly above it on the Handset display. After a mobile phone is paired, MMOBILEN is displayed. Navigator key – MDN, MCN, MFN, or MEN: Scroll through various lists and items.

  • Page 13: Display Icons/Indicators

    Getting Started MERASEN Item Meaning MANSWER ON/OFFN A mobile line is in use. ANSWER ON/OFF indicator R When flashing: MLOCATORN MINTERCOMN The mobile call is put on R You can locate a misplaced handset hold. by pressing MLOCATORN. R When flashing rapidly: MEXITN A mobile call is being N (PLAY/STOP)
  • Page 14 Getting Started Item Meaning Item Meaning Mobile 1 Someone is using the Mobile 1 Someone is using the in use corresponding line. in use corresponding line. Mobile 2 Mobile 2 in use in use M1&M2 in M1&M2 in Line in Line in Corresponding lines (1, 2: mobile line) are Corresponding lines (1, 2: mobile line, L:...

  • Page 15: Date And Time

    Getting Started Date and time Handset MMENUN#101 Enter the current month, date, and year by selecting 2 digits for each. Example: 12 July, 2015 12 07 15 MOKN Enter the current hour and minute (12-hour clock format) by selecting 2 digits for each.

  • Page 16: Link To Mobile

    Link to Mobile Your mobile phone: Link to mobile feature While the corresponding MOBILE indicator is flashing, follow the You can connect your base unit and mobile instructions of your mobile phone to phone using Bluetooth wireless technology, so enter the pairing mode. that you can make or answer mobile calls R Depending on your mobile phone, it using your phone system.

  • Page 17: Link To Mobile Settings

    Link to Mobile not announced even if the Talking Caller ID is turned on. Link to mobile settings Important: R To use this feature, your mobile phone Selecting which unit receives must support Bluetooth in-band ringtone. mobile calls Refer to your mobile phone’s operating instructions.

  • Page 18: The Handset

    Link to Mobile Important: R A long beep sounds. MOFFN R When 3 Bluetooth devices (2 mobile phones and 1 headset) are paired to the base unit, only 2 Bluetooth devices can be Mobile line only mode (If you do used with the unit at the same time, and the base unit loses its connection from other not use the landline)
  • Page 19 Link to Mobile MSAVEN a MOFFN When you use the landline again Before connecting the telephone line to the Changing the Bluetooth PIN base unit, select “Off” in step 2, “Mobile line only mode (If you do not use the landline)”, (Personal Identification Number) page 18.

  • Page 20: Making/Answering Calls Using The Handset

    Making/Answering Calls Using the Handset MbN: Select the desired phone number. Making mobile calls MMOBILEN R The unit starts dialling when: Important: – only 1 mobile phone is paired. R The unit can be used to talk on 2 lines at –...

  • Page 21: Answering Calls

    Making/Answering Calls Using the Handset Note: Making a call using the redial list R The ringer volume you set is kept for each The last 5 phone numbers dialled are stored in line (landline and mobile lines). the redial list (each 48 digits max.). MEN REDIAL MbN: Select the desired phone number.

  • Page 22: Landline Calls

    Making/Answering Calls Using the Handset R This feature is not available while using the Note: speakerphone. R To change the recall time, see page 44. Handset equalizer For Call Waiting or Call Waiting This feature clarifies the voice of the person Caller ID service users for you are talking to, producing a more landline calls...
  • Page 23 Making/Answering Calls Using the Handset ready to talk before transferring. For Transferring calls, conference example, if your mobile phone has a top calls cover, open it beforehand. Outside calls can be transferred or a Transferring a mobile call from a conference call with an outside party can be mobile phone to the handset made between 2 handsets.

  • Page 24: Power Backup Operation For Landline

    Within 1 minute, place the handset on the base unit. R Wait until speakerphone is turned Panasonic Ni-MH battery on automatically and the call is performance (supplied batteries) made. during power backup mode...
  • Page 25 Making/Answering Calls Using the Handset Making a call using the phonebook There must be at least 2 handsets registered to the base unit in order for the phonebook feature to be used during a power failure. You should leave one handset on the base unit for supplying the power, and use another handset for making calls.

  • Page 26: Making/Answering Calls Using The Base Unit

    Making/Answering Calls Using the Base Unit MbN: Select the desired phone number. Making mobile calls Press MMOBILE 1N or MMOBILE 2N. Important: Erasing a number in the redial list R The unit can be used to talk on 2 lines at the same time (for example, 2 mobile lines, MREDIALN or the landline and 1 mobile line).

  • Page 27: Answering Calls

    Making/Answering Calls Using the Base Unit Example: If you need to dial the line access R A handset user can take the call by number “9” when making outside calls with a pressing M PBX: Note: 9 a MPAUSEN R While a landline call is on hold, the SP-PHONE indicator flashes.
  • Page 28 Making/Answering Calls Using the Base Unit Note: R To put the outside call on hold, press MHOLDN. To resume the conference, R Please contact your phone service provider press MCONFN. for details and availability of this service in your area. Transferring a mobile call Call share between the base unit and a...
  • Page 29 Making/Answering Calls Using the Base Unit To hang up the 2nd call and return to the 1st call (mobile call), press MZN, then press MMOBILE 1N or MMOBILE 2N. TGF372AZ(en)_0519_ver003.pdf 2015/05/19 9:28:44...

  • Page 30: Intercom

    Intercom Base unit Intercom Press MZN to answer the page. Intercom calls can be made: When you finish talking, press MZN. – between handsets – between a handset and the base unit Turning auto intercom on/off Note: R When paging unit(s), the paged unit(s) This feature allows the handset or base unit to beeps for 1 minute.

  • Page 31: Nuisance Call Block

    Nuisance Call Block toll-free phone number prefix or certain area codes. Using the MCALL BLOCKN – “Withheld”: The unit blocks calls that button have no phone number. Handset You can press the MCALL BLOCKN button in Base unit the following situations to disconnect the current call and add a phone number to the Single phone numbers and ranges of numbers can be stored in the call block list up to 250...
  • Page 32 Nuisance Call Block MbN: “Yes” a MSELECTN Blocking incoming calls that Edit the phone number if necessary (24 have no phone number digits max.). You can block calls when no phone number is MSAVEN a MEXITN provided, such as private callers or out of area calls.
  • Page 33 Nuisance Call Block MbN: Select the desired entry. MbN: “Yes” a MSELECTN a MEXITN R After viewing, press MOFFN to exit. To edit a number: MEDITN a Edit the number. a MSAVEN a MOFFN To erase a number: MERASEN a MbN: “Yes” a MSELECTN a MOFFN Base unit MMENUN#217...

  • Page 34: Phonebook

    Phonebook Character Phonebook & ’ – You can add 3,000 names (16 characters max.) and phone numbers (24 digits max.) to the phonebook, and assign each phonebook entry to the desired group (page 35). The following groups are available: – Group 1: “Home” (default) –...
  • Page 35 Phonebook MbN: “Save CID” a MSELECTN Handset MbN: “Phonebook” a MSELECTN n When a mobile phone is paired: Continue from step 3, “Editing entries”, MEN REDIAL page 36. MbN: Select the desired phone number. Base unit a MMENUN MbN: “Save” a MSELECTN MCIDN To store the name, continue from step MbN: Select the desired entry.

  • Page 36: Editing Entries

    Phonebook To set group ringer tone Searching by first character MbN: Select the current setting of the group ringer tone. a MSELECTN a MbN: Handset / Base unit Select the desired ringer tone. a MSAVEN Proceed with the operation for your unit. MOFFN Handset: MFN W Base unit: MWN...

  • Page 37: Speed Dial

    Phonebook calling card access number or bank account MMENUN a MbN: “Edit” a MSELECTN PIN that you have stored in the phonebook, Edit the name if necessary. a MOKN without having to dial manually. Edit the phone number if necessary. a Handset / Base unit MOKN Proceed with the operation for your unit.

  • Page 38: Editing An Entry

    Phonebook Note: R If you edit a phonebook entry which is assigned to a speed dial key, the edited entry does not transfer to the speed dial key. Editing an entry Handset Press and hold the desired speed dial key (1 to 9).

  • Page 39: Programming

    Programming Menu list To access the features, there are 2 methods. Handset / Base unit n Scrolling through the display menus MMENUN Press MCN or MDN to select the desired main menu. a MSELECTN Press MCN or MDN to select the desired item from the next sub-menus. a MSELECTN Press MCN or MDN to select the desired setting.
  • Page 40 Programming Sub-menu 1 Sub-menu 2 Settings Code Greeting – #302 Record greeting Check greeting – #303 – #304 Pre-recorded (Reset to pre-recorded greeting) New message Outgoing call #338 – On/Off <Off> alert Outgoing call – – Notification to Outgoing call Activate –...
  • Page 41 Programming Main menu: “Bluetooth” Sub-menu 1 Sub-menu 2 Settings Code Link to mobile – #6251 Connect – 1:Add new Disconnect #6252 device Off–6 <6> Ringer volume #6281 (for MOBILE 1) – 2:Add new #6282 device – <Tone 2> #6291 Ringer tone (for MOBILE 2) <Tone 4>...
  • Page 42 Programming Sub-menu 1 Sub-menu 2 Settings Code Settings <1 min> #632 Auto connect 3 min 5 min 10 min Mobile area – #633 code Mobile line only #157 <Off> mode Mobile line #634 Mobile phone 1 select Mobile phone 2 –...
  • Page 43 Programming Main menu: “Settings” Sub-menu 1 Sub-menu 2 Settings Code Ring adjustments Off–6 <6> #160 – Ringer volume *3, *7 <Tone 1> #161 – Ringer tone (Handset) <On> #201 Interrupt tone Do not disturb mode #238 – On/Off <Off> Do not disturb mode <11:00 PM/06:00 #237 –...
  • Page 44 Programming Sub-menu 1 Sub-menu 2 Settings Code Nuisance call Single number – #217 block Range of numbers – Withheld #240 <Off> First ring <Yes> #173 Speed dial – – #261 – – #302 Record greeting – #331 Voice mail Save VM access# –...
  • Page 45 Programming Sub-menu 1 Sub-menu 2 Settings Code Registration Register handset – #130 – #131 Deregistration – <Australia> #136 Country New Zealand Power failure – <Auto> #152 Main menu: “Baby monitor” Sub-menu 1 Sub-menu 2 Settings Code On/Off – #268 <Off> Sensitivity level –...
  • Page 46 Programming Main menu: “Bluetooth” Sub-menu 1 Sub-menu 2 Settings Code Off–6 <3> Ringer volume #6281 Link to mobile – Mobile phone 1 #6282 – Mobile phone 2 <On> #6101 Alert settings – Alert On/Off #6102 <On> #6031 Alert settings – Voice alert #6032 Mobile line –...

  • Page 47: Alarm

    Programming When the mobile line only mode is turned on, these menus are not displayed (page 18). After the Bluetooth device is paired, the device name is displayed. For MOBILE 1 For MOBILE 2 The preset melodies in this product (“Tone 3” - “Melody 10”) are used with permission of ©...

  • Page 48: Do Not Disturb Mode

    Programming Using the phonebook’s group feature “Weekly” (page 35), you can also select groups of Alarm sounds weekly at the set time(s). callers whose calls override do not disturb mode and ring the unit (Caller ID subscribers Proceed with the operation according to only).

  • Page 49: Baby Monitor

    Programming responsibility to stay close enough to Changing the start and end time handle any eventuality. Handset / Base unit Note: R If the unit is connected to a PBX system, MMENUN#237 you cannot set the baby monitor. Continue from step 3 for handset or step R During the monitoring mode, battery 3 for base unit, “Turning do not disturb consumption is faster than usual.
  • Page 50 Programming Handset Editing an outside monitoring number n From the phonebook: Handset MMENUN#268 Press MMENUN on the handset being MbN: “On” a MSELECTN monitored. MbN: Select “Outgoing call” to MbN: “On/Off” a MSELECTN monitor from an outside line. a MbN: “On” a MSELECTN MEDITN a MADDN MbN: Select the outside line.

  • Page 51: Other Programming

    Programming MSAVEN a MOFFN Answering the baby monitor n When monitoring with a unit: Displaying the handset name Handset: Press M N to answer a call. Base unit: Press MZN to answer a call. You can select whether or not the handset If you want to respond from the monitoring name is displayed in standby mode.
  • Page 52 Increasing the range of the base unit You can increase the signal range of the base unit by using a DECT repeater. Please use only the Panasonic DECT repeater noted on page 3. Contact your Panasonic dealer for details. Important: R Before registering the repeater to this base unit, you must turn the repeater mode on.

  • Page 53: Caller Id Service

    Caller ID Service – “Private caller” /“Private” The caller requests not to send caller Using Caller ID service information. R If the unit is connected to a PBX system, Important: caller information may not be properly R This unit is Caller ID compatible. To use received.

  • Page 54: Caller List

    Caller ID Service Press MCN to search from the most recent Phonebook name announcement call, or MDN to search from the oldest call. When caller information is received and it Proceed with the operation for your unit. matches a phone number stored in the Handset: phonebook, the stored name in the –...
  • Page 55 Caller ID Service Press and hold MCLEARN until all digits Using a mobile line: erased. a MSAVEN a MOFFN To make a mobile call, continue from step 3, “Viewing the caller list and calling back”, page 54. Editing a caller’s phone number Using the landline: The caller’s telephone number, which is sent to your telephone from your local telephone...

  • Page 56: Using Bluetooth® Devices

    Using Bluetooth® Devices “Manual”: Copy entries you selected. Copying phonebook from a R “Select mode” menu is displayed only when the mobile phone supports mobile phone (phonebook PBAP (Phone Book Access Profile) for transfer) Bluetooth connection. R Some mobile phones may require you You can copy phonebook entries from the to perform an operation on the mobile paired mobile phones or other mobile phones...

  • Page 57: Link To Cell App

    R After you copy the entries, confirm that the numbers were transferred correctly. Link to Cell app www.panasonic.net/pcc/support/tel/ For Android users appalerts The free Link to Cell app helps you integrate your Android phone with your DECT phone for convenient use.

  • Page 58: Text Message (Sms) Alert

    R For further information, refer to the R In step 1, you can also enter the “Alert instructions on web page listed below: settings” menu by pressing and holding www.panasonic.net/pcc/support/tel/sms/ MAPP ALERTSN on the base unit. R To use this feature, the following settings are required: –...

  • Page 59: Using A Bluetooth Wireless Headset (Optional) For Landline Calls

    Using Bluetooth® Devices You can configure this setting using either the mobile lines, or the headset and 1 mobile base unit or one of the handsets. line). R For best performance, we recommend Handset / Base unit using a Bluetooth headset within 1 m of the base unit.
  • Page 60 Using Bluetooth® Devices n To switch to the base unit: Unpairing a headset Press MZN on the base unit. You can cancel a pairing of the headset that is stored to the base unit. Call sharing between your headset and the handset Handset Important: MMENUN#612...

  • Page 61: Answering System For Landline

    Answering System for Landline Handset Answering system for To turn on: landline MMENUN#327 To turn off: The answering system can answer and record MMENUN#328 calls for you when you are unavailable to MOFFN answer the phone. You can also set the unit to play a greeting Note for base unit and handset: message but not to record caller messages by R When the answering system is turned on,...

  • Page 62: Listening To Messages

    Answering System for Landline Resetting to a pre-recorded greeting Operating the answering system message during playback If you change into a pre-recorded greeting Operation message once you record your own greeting message, your own recorded greeting MDN or MCN Adjust the speaker message is erased.
  • Page 63 Answering System for Landline When finished, press MOFFN. Calling back (Caller ID subscribers Note: only) R To switch to the receiver, press M n Using a landline: R You can also use the MPLAYN soft key, if Press MPAUSEN during playback. displayed, to play new messages.

  • Page 64: Advanced New Message Alerting Features

    Answering System for Landline MbN: “Notification to” a Advanced new message MSELECTN a MADDN MbN: “Phonebook” a MSELECTN alerting features MbN: Select the desired phonebook entry. a MSAVEN a MOFFN Audible message alert n By entering a phone number: This feature allows the base unit to beep to MMENUN#338 inform you of a new message arrival when new messages are recorded.

  • Page 65: Remote Operation

    Answering System for Landline the record. However, on the base unit redial MbN: “Yes” a MSELECTN a MOFFN list it is shown as “Message alert”. R The new message alert setting is turned off. Activating/inactivating the remote Remote operation access code to play messages Using a touch-tone phone, you can call your If you activate this feature, you must enter the phone number from outside and access the...

  • Page 66: Answering System Settings

    Answering System for Landline When finished, hang up. Enter your remote access code within 10 seconds after the long beep. R The greeting message is played back. Voice guidance R You can either hang up, or enter your remote access code again and begin During remote operation, the unit’s voice remote operation (page 65).
  • Page 67 Answering System for Landline Handset Selecting “Greeting only” MMENUN#211 You can select “Greeting only” which sets the unit to announce a greeting message to MbN: Select the desired setting. a callers but not record messages. MSAVEN a MOFFN Select “Greeting only” in step 2 on “Caller’s recording time”, page 67.

  • Page 68: Useful Information

    Useful Information Example: Voicemail service for 083210 PPPP 8888 landline VM access Pauses Password To receive Call Minder or Message Mailbox number messages, please note the following: “Call Minder” and “Message Mailbox” are automatic answering services offered by your To erase the voicemail access number phone service provider.

  • Page 69: Wall Mounting

    Useful Information Insert the lower tabs of the adaptor into Wall mounting the unit’s bottom slots (A), then insert by pushing down the levers of the adaptor The base unit can be mounted on a wall by into the upper slots (B). changing the wall mounting adaptor’s position.

  • Page 70: Error Messages

    Useful Information Error messages Display message Cause/solution Access # to R You have not stored the voicemail access number. VM service Store the number (page 68). is not stored Base no power R Confirm the base unit’s AC adaptor is connected to the unit and the power outlet correctly.

  • Page 71: Troubleshooting

    Useful Information Display message Cause/solution Invalid R There is no handset registered to the base unit matching the handset number you entered. R The handset is not registered to the base unit. Register the handset (page 51). Requires R You must subscribe to a Caller ID service. Once you subscription receive caller information after subscribing to a Caller to Caller ID.

  • Page 72: Battery Recharge

    R If your mobile phone is already registered on another Panasonic DECT phone, this function will not work properly. We strongly recommend that you remove the registration of this phone on both your mobile phone and on the other Panasonic DECT phone.
  • Page 73 Useful Information Problem Cause/solution I fully charged the batteries, but R Clean the battery ends ( ) and the charge contacts – still flashes, with a dry cloth and charge again. – is displayed, or R It is time to replace the batteries (page 10). –...
  • Page 74 Useful Information Problem Cause/solution I can make and answer mobile R The Bluetooth technology on your mobile phone may not calls but cannot hear a sound. be functioning normally. Turn off and on your mobile phone. R Disconnect and reconnect the base unit AC adaptor and try again.
  • Page 75 Useful Information Problem Cause/solution Caller information is not R The ringer volume for landline is turned off. Adjust the announced. ringer volume (page 43, 46). R The ringer volume for mobile line is turned off. Adjust the ringer volume (page 41, 46). R The unit which is not selected to ring for mobile calls does not announce caller information.
  • Page 76 Useful Information Problem Cause/solution I cannot have a conversation R Confirm that the Bluetooth wireless headset supports the using the headset. HeadSet Profile (HSP) specification. R Your Bluetooth headset is not paired. Pair it (page 59). I cannot connect my headset to R Turn your headset off, then turn it on and try again.

  • Page 77: Answering System

    Useful Information Answering system Problem Cause/solution The unit does not record new R The answering system is turned off. Turn it on (page 61). messages. R The answering system does not answer or record calls from mobile lines. R The message memory is full. Erase unnecessary messages (page 62, 63).

  • Page 78: Liquid Damage

    Useful Information Voicemail Problem Cause/solution “Voice mail msg. via R This notification is displayed when your phone service provider’s voicemail service (not the unit’s answering phone co.” is shown on the system) has recorded a message for you. Typically you handset display.

  • Page 79: Warranty

    6) Damage to the product caused by accident, misuse or Act of God. 7) Repairs when the product has been dismantled, repaired, modified or serviced by other than a Panasonic Authorised Dealer authorised to service that type of product. IF YOUR PANASONIC PRODUCT FAILS WITHIN THE...

  • Page 80: Index

    Index Error messages: 70 Groups: 35 Index Handset Deregistration: 52 3-way conference: 22, 28 Name: 51 Additional handset: 51 Registration: 51 Alarm: 47 Hold: 21, 27 Answering calls: 21, 27 Intercom: 30 Answering system Call screening: 66 Key finder: 43, 45 Erasing messages: 62, 63, 66 Key tone: 44 Greeting message: 61...
  • Page 81 Index Transferring calls: 23, 28 Troubleshooting: 71 VM (Voicemail): 68 Voicemail: 68 Volume Receiver: 20 Ringer (Base unit): 27, 46 Ringer (Handset): 21, 41, 43 Speaker: 20, 26 Wall mounting: 69 TGF372AZ(en)_0519_ver003.pdf 2015/05/19 9:28:47...
  • Page 82 Notes TGF372AZ(en)_0519_ver003.pdf 2015/05/19 9:28:47...
  • Page 83 Notes TGF372AZ(en)_0519_ver003.pdf 2015/05/19 9:28:48...
  • Page 84 Sales Department: 18 Sir Woolf Fisher Drive, Highbrook, East Tamaki, Auckland, New Zealand Phone: (09) 272 0100 Fax: (09) 272 0137 1-62, 4-chome, Minoshima, Hakata-ku, Fukuoka 812-8531, Japan © Panasonic System Networks Co., Ltd. 2015 *PNQX6721ZA* *PNQX6721ZA* PNQX6721ZA TT0615MG0 TGF372AZ(en)_0519_ver003.pdf 2015/05/19...

Table of Contents