Table of Contents
Advertisement
Setup
34
4
Press the + or - key until >Print Calibration Page is indicated.
5
Press the ENTER key twice to reprint the Colour Calibration Page.
• Repeat step 3 above, if necessary.
6
Repeat steps 3 through 5 for each colour (MAGENTA, YELLOW,
BLACK).
• To skip a colour, press the + button.
• To return to a previous colour, press the - button.
7
When the Colour Calibration Page and the Calibration Reference
match in all four colours, press the MODE key to finalise the
calibration procedure.
Notes:
• The colour density setting affects the average life of toner.
• Save the Colour Calibration Reference for future calibrations.
Advertisement
Table of Contents
