Table of Contents
Advertisement
Care and Maintenance
98
Error Message
Replace IU-80
Imaging unit
Replace OS-80
Oil supply roll
Replace Toner
TD-80C (Cyan)
Replace Toner
TD-80K (Black)
Replace Toner
TD-80M (Magenta)
Replace Toner
TD-80Y (Yellow)
Reset Transf.Roll
Press ENTER
Set paper
Press CONTINUE
Toner low
TD-80C (Cyan)
Toner low
TD-80K (Black)
Toner low
TD-80M (Magenta)
Toner low
TD-80Y (Yellow)
Warning FK-80
Fuser KIT
Warning IU-80
Imaging unit
Warning TU-80
Transfer roller
Warning battery
MEMORY CARD
Warning
Low memory
Possible Cause
The imaging unit is worn
out.
The oil supply roller is
worn out.
The cyan toner developer
is empty.
The black toner developer
is empty.
The magenta toner
developer is empty.
The yellow toner develop-
er is empty.
The printer is waiting for
your input of confirming
that you have replaced the
transfer roller and reset-
ting its counter (
P. 105).
The multi-purpose tray is
empty.
The cyan toner developer
is almost empty.
The black toner developer
is almost empty.
The magenta toner
developer is almost empty.
The yellow toner develop-
er is almost empty.
The fuser kit is wearing
out.
The imaging unit is
wearing out.
The transfer roller is
wearing out.
The memory card's
battery is running out.
The printer's internal
memory is insufficient to
complete the printing.
Corrective Action
Replace the imaging unit now.
Replace the oil supply roller
now.
Replace the cyan toner devel-
oper now.
Replace the black toner
developer now.
Replace the magenta toner
developer now
Replace the yellow toner
developer now.
Press ENTER and the printer
resets the transfer unit
counter to 0000000.
Add a sheet of paper to the
multi-purpose tray, and press
CONTINUE key. (This message
appears when the multi-
purpose tray is in manual
mode (
P. 45).
Replace the cyan toner devel-
oper as soon as possible.
Replace the black toner
developer as soon as possible.
Replace the magenta toner
developer as soon as possible.
Replace the yellow toner
developer as soon as possible.
Replace the fuser kit as soon
as possible.
Replace the imaging unit as
soon as possible.
Replace the transfer roller as
soon as possible.
Change the memory card
battery as soon as possible.
(See the memory card manu-
facturere's instruction.)
Press CONTINUE key to print
the page processed so far.
Remove any unnecessary fonts
or macros in the printer or
install additional memory
(
P. 67).
Advertisement
Table of Contents
