Table of Contents
Advertisement
3
Push down on the metal plate until it clicks, locking it in place.
4
Fan the media (paper/transparencies), then tap it on a level surface
to avoid media jams or skewed printing.
Notes:
• To optimize your printer's performance, always use clean, unused media.
• Be careful not to leave fingerprints on the media, which can result in a smudged
print.
• Reusing media that has been fed through the printer once (for example, after jams)
can reduce the life of the consumables and paper path components.
• The recommended transparency is 3M CG3700. If the print quality is poor, print on
the other side.
Setup
17
Advertisement
Table of Contents
