1. Manuals
  2. Brands
  3. Kyocera Manuals
  4. All in One Printer
  5. FS-5800C
  6. User manual

Kyocera FS-5800C User Manual

Colour laser printer
Hide thumbs Also See for FS-5800C:
Table of Contents

Advertisement

Quick Links

Download this manual See also: User Manual
Cautions
To avoid machine malfunction, do not use the equipment under the following conditions:
• Direct exposure to sunlight
• Extremely high or low temperature [temperature range: 10˚C to 32.5˚C
(50˚F to 90.5˚F)]
• Extremely high or low humidity (humidity range: 20% to 80% RH)
• Condensation due to rapid change of temperature
• Unstable or unlevel surfaces
• Too much media which exceeds
the limit mark on the guide of
the tray.

Before You Start

• Directly in front of air
conditioning vents
• Front/right/left covers opened
while the printer is operating. It
may cause a media jam.
• Areas of poor ventilation
• Areas of high dust or chemical
fume concentration (solvent etc.)
• Liquids near the equipment
Genuine or Original
• We strongly recommend to use
only the original Kyocera toner
developer. Use of Kyocera toner
developer assures the intended
long term reliability of the printer.
1

Advertisement

Table of Contents
loading

Related Manuals for Kyocera FS-5800C

Summary of Contents for Kyocera FS-5800C

  • Page 1: Before You Start

    Genuine or Original • We strongly recommend to use • Too much media which exceeds • Front/right/left covers opened only the original Kyocera toner the limit mark on the guide of while the printer is operating. It developer. Use of Kyocera toner the tray.

  • Page 2: Static Electricity Damage

    Before You Start CD-ROM To prevent the CD-ROM from accidental damages: • Do not touch or write on the • Do not leave the disc out of the • Do not leave the disc in direct surface of the disc. protective case.
  • Page 3 Before You Start Features The FS-5800C Colour Laser Printer provides fast, high-quality colour printing on plain paper, plus the ease of operation and high performance you expect from a laser printer. Some of its features include: High quality Resolution Maximum 1200 dpi*...

  • Page 4: System Requirements

    Before You Start System Requirements To operate the FS-5800C effectively, refer to the following: CPU: More than Pentium (133 MHz or faster CPU is recommended.) Operating System: Windows 3.1 / Windows 95 / Windows NT RAM: 16 MB or more (More than 32 MB is recommended.)

  • Page 5: Minimum Space Requirements

    Before You Start Minimum Space Requirements 45 cm (17.7”) Rear Multi-Purpose Tray Opening Space 35 cm (13.8”) Controller Board Opening Space Right Left 50 cm (19.7”) Media tray Opening 60 cm (23.6”) Space Front cover opening space Power Source • The voltage level of the power source must not vary more than ±10% from the voltage level marked on the nameplate (located on the back of the unit).
  • Page 6 They have been specifically designed to protect the equipment during shipment. 1. Printer (Colour imaging unit, Fuser kit, Paper cassette and Output tray are included.) 2. Toner developers (black, cyan, magenta, and yellow) 3. Power cord 4. Kyocera Digital Library (Manuals, drivers, utilities) CD-ROM 5. Colour Calibration Reference card...

  • Page 7: Part Names

    Before You Start Part Names Front side view Operation panel Right side cover Output tray Media cassette P. 16) Front cover Fuser P. 80) Imaging unit P. 12) Rear side view Network interface card slot Serial interface connector P. 25) Multi-purpose (MP) tray P.

  • Page 8: Control Panel Overview

    Before You Start Control Panel Overview Ready 600 A4 001 Message Display The message display displays the printer’s operational mode. Messages which are displayed and their meanings are given in the table below. Message Meaning The printer is self-testing after power-up and is not ready to Self test print.

  • Page 9: Interface Indicator

    Before You Start Interface Indicator The interface indicator indicates the interface over which data is currently being received or was last received. The current interface is indicated by one of the following messages: Display Description Parallel interface Serial interface Optional interface (if a network interface card is installed) Note: The display will blink while the printer is receiving data and continue blinking until the interface is released, even after data transmission is finished.
  • Page 10 Before You Start Symbolic Indicator This printer icon includes the indicators which show the following information regarding the printer’s paper and toner status. Name Description Face-down indicator This indicates when printed pages are delivered to the output tray in the face-down stack (correct order). The pages are deliv- ered in the reverse order when this indicator is not lit.

  • Page 11: Control Keys

    Before You Start Control Keys Function ON LINE This key toggles the printer on-line and off-line. CANCEL This key cancels the data processed in the printer during print- ing. When the printer is in a mode selection sequence (See MODE key below), pressing this key abandons mode selection in course.

Table of Contents