Table of Contents
Advertisement
4
Reinsert the media cassette into the printer; use adhesive tape to
secure the cassette to the printer.
5
If you have other media cassettes, repack them for shipping or
storage in their original shipping boxes.
6
Open the printer's front cover.
(1)
Loosen the two thumbscrews by turning them counterclockwise.
(2)
Turn the lower green lever 180° counterclockwise.
(3)
(1)
7
Grasping the front green handle, slide the unit out until it
(1)
catches.
Lift up the green handle on the left. Pull the imaging unit out of
(2)
the printer.
Important:
Do not touch the green surface (the right side) or the black belt (the under side).
Finger prints may affect the print quality.
Safety Caution:
The imaging unit weighs approximately 6.5 kg (14.3 lbs.). Always use the handles
when lifting it.
Black belt
Care and Maintenance
(2)
(3)
(2)
(2)
(1)
Green surface
103
Advertisement
Table of Contents
