How To Check The View Mode Using A Tact Switch - Samsung AM072BXV Series Service Manual

Key Options

8-4 How to check the view mode using a tact switch

■ AM080/100/120/140/160/180/200/220/240/260AXVGGH, AM080/100/120/140/160/180/200/220/240/260AXVGGR,
AM080/100/120/140/160/180/200/220/240/260AXVAGH, AM100/120/140/160/180AXVDGH
▶ Tact switch installation and options of how to set up and functional description
■ Options of how to set up
1. Entry by pressing the K2 for a long time.(However, the operation is only possible during the stop.)
- Upon entering the following is displayed. (If the compressor is set truncation, 1 or 2 is displayed in Seg4.)
- Displays the number of the currently selected option. Seg1, Seg2.
- Displays the set value of the currently selected option. Seg3, Seg4.
2. After entering the option, briefly press the K1 switch will change the value of Seg1, Seg2 and then select the option to change.
Example)

3. Press the switch briefly to the option you want to change the items of K2 will change the value of Seg3, Seg4 and then select the option to change.
Example)

4. K2 switch is pressed for 2 seconds after the option is selected, 7-Segment entire blinks and enters the tracking mode, and the option value is
saved.
- As described above, if you do not normal shutdown the option settings can not be saved.
※ Press K1 for a long time, if you want to go back to the settings before the entry while setting the option to cancel the setting.
※ If you want the factory settings option in the setting mode, press K4 for a long time.
- K4 switch is pressed for a long time, all options settings return to the factory settings, but the settings are saved is not.
K2 switch is pressed for a long time, 7-Segment enters the tracking mode and the settings will be saved.
Samsung Electronics 287