[Tcp/Ip Settings] - Canon imageCLASS MF273dw User Manual

[TCP/IP Settings]

Specify the settings to use the machine on a TCP/IP network.
* Values in bold red text are the default settings for each item.
[IPv4 Settings](P. 394)
[IPv6 Settings](P. 396)
[WINS Settings](P. 397)
[LPD Settings](P. 397)
[RAW Settings](P. 398)
[WSD Settings](P. 398)
[IPv4 Settings]
[Menu] [Preferences]
Specify the settings to use the machine in an IPv4 environment.
[IP Address Settings]
[Menu] [Preferences]
Set the IPv4 address either automatically or manually.
[Auto Acquire]
[Select Protocol]
[Off]
[DHCP]
[Auto IP]
[Off]
[On]
[Manually Acquire]
[IP Address]: 0.0.0.0
[Subnet Mask]: 0.0.0.0
[Gateway Address]: 0.0.0.0
[Check Settings]
*1
May not be displayed depending on the model, the installed options, and other settings.
[PING Command]
[Menu] [Preferences]
Execute a PING command to check whether the machine can connect to devices on the network.
Whether the Machine Can Connect to Network Devices(P. 89)
[DNS Settings]
[Menu] [Preferences]
Specify the DNS settings when using the machine in an environment with a Domain Name System (DNS)
implemented. Configuring DNS(P. 79)
Settings Menu Items
[IPP Print Settings](P. 399)
[Use HTTP](P. 399)
[Network Link Scan Settings](P. 399)
[Port Number Settings](P. 399)
[MTU Size](P. 400)
[Network]

[TCP/IP Settings]

[Network] [TCP/IP Settings]
*1
[Network] [TCP/IP Settings]
[Network] [TCP/IP Settings]
[IPv4 Settings]
Setting IPv4 Addresses(P. 71)
[IPv4 Settings]
[IPv4 Settings]
394
94LS-0A0
Checking