Registering Destinations To The Address Book (Operation Panel) (Touch Panel Model) - Canon imageCLASS MF273dw User Manual

Registering Destinations to the Address Book
(Operation Panel) (Touch Panel Model)
You can register destinations to the Address Book by directly entering their information using the operation panel.
1
On the operation panel, press [Addr. Book] in the [Home] screen.
Screen(P. 113)
2
Press [Regist Dest.].
➠
The [Register As] screen is displayed.
If the [Address Book PIN] screen is displayed, enter the PIN, and press [Apply].
3
Press [Coded Dial] or [One-Touch], and press [Fax].
● If [Coded Dial] is selected, unregistered coded dialing numbers are automatically set and the [Fax] screen
is displayed.
● When [One-Touch] is selected, select the number to register.
You can change this number to another number later.
● When registering group destinations, see the following.
Registering Groups to the Address Book (Operation Panel) (Touch Panel Model)(P. 154)
4
Enter the destination information.
● You can register a destination without entering its name, but by entering the name, you can search for it
by its initials when specifying the destination.
● Press [Name] and enter the name, and then press [Apply].
● For destination information, press [Fax Number], enter that information, and then press [Apply].
● When entering an international destination in [Fax Number], enter the international access number,
country code, and fax number in that order. If you are unable to connect, press [Pause] in between the
numbers to add a pause. You can change the pause time.
● To change a [Coded Dial] number, press [Coded Dial] and enter a three-digit coded dialing number using
the numeric keys.
5
Set the fax sending details, as needed.
Set the details when a send error occurs or it takes time to send a fax to that number.
Basic Operations
[Set Pause Time](P. 437)
152
94LS-03A
[Home]