Configuring The Printer's Tcp/Ip Network Settings - Canon ipf8300 User Manual

Network Setting

Configuring the Printer's TCP/IP Network Settings

Follow the steps below to configure the TCP/IP network settings.
When using an IPv4 IP address
1.
Start the web browser and enter the following URL in the Location (or Address ) box to display the RemoteUI
page.
http://printer IP address or name/
Example: http://xxx.xxx.xxx.xxx/
2.
Select Administrator Mode and click Logon.
3.
If a password has been set on the printer, enter the password.
4.
Click Network in the Device Manager menu at left to display the Network page.
5.
Click Edit in the upper-right corner of the TCP/IPv4 group to display the Edit TCP/IP Protocol Settings page.
6.
Refer to the TCP/IP Settings Items table to complete the settings.
TCP/IP Settings Items
Item
Use DHCP
Use BOOTP
Use RARP
10
Enable DNS Dy-
namic Update
Use Zeroconf Func-
tion
IP Address
Subnet Mask
Gateway Address
LPD Printing
IPP Printing
IPP Printer URI
956
RAW Printing
RAW Mode Bi-di-
rection
FTP Printing
Use Discovery
Scope
SMTP Server Ad-
dress
Configuring the Printer's TCP/IP Network Settings
Downloaded from ManualsPrinter.com Manuals
> Network Setting >
Activate this setting to use DHCP for configuring the IP address.
Activate this setting to use BOOTP for configuring the IP address.
Activate this setting to use RARP for configuring the IP address.
Activate this setting to perform DNS server registration automati-
cally.
Activate this setting to use Bonjour.
Specify the printer's IP address.
Specify the printer's subnet mask.
Specify the printer's default gateway.
Activate this setting to use LDP Printing.
Activate this setting to use IPP Printing.
Specify the URI of the printer used for IPP printing using up to
252 characters.
Activate this setting to use Raw Printing.
Activate this setting to use Raw mode bidirectional communica-
tion.
Activate this setting to use FTP Printing.
Activate this setting to use SLP Discovery function.
Enter the SLP search range.
Specify the SMTP server's IP address.
You can also specify the SMTP server domain name, if desired.
Details Default Setting
Off
Off
Off
Off
On
0.0.0.0
0.0.0.0
0.0.0.0
On
On
printer
On
Off
On
On
default
0.0.0.0
iPF8300