Lexmark CX532 User Manual page 27

Set up, install, and configure
3
Apply the changes.
Note: You need a printer hard disk or an intelligent storage drive to scan multiple cards.
Using Display Customization
Before using the application, make sure to enable and configure the screen saver, slideshow, and wallpaper
settings from the Embedded Web Server.
Managing screen saver and slide show images
1
From the Embedded Web Server, click Apps > Display Customization > Configure.
2
In the Screen Saver and Slideshow Images section, add, edit, or delete an image.
Notes:
•
You can add up to 10 images.
•
When enabled, the status icons appear on the screen saver only when there are errors, warnings, or
cloud‑based notifications.
3
Apply the changes.
Changing the wallpaper image
1
From the home screen, touch Change Wallpaper.
2
Select an image to use.
3
Apply the changes.
Running a slide show from a flash drive
1
Insert a flash drive into the front USB port.
2
From the home screen, touch Slideshow.
Note: You can remove the flash drive after the slide show starts, but the images are not stored in the printer.
If the slide show stops, then insert the flash drive again to view the images.
Using Customer Support
Notes:
•
This application is supported only in some printer models. For more information, see
applications" on page
•
For information on how to configure the application settings, see the Customer Support Administrator's
Guide.
1
From the home screen, touch Customer Support.
2
Print or e‑mail the information.
25.
27
"Supported