Lexmark CX532 User Manual page 116

Use printer menus
Menu item
Symbol Set
[List of available symbol set] (10U
PC‑8*)
Pitch
0.08–100.00 (10.00*)
Orientation
Portrait*
Landscape
Reverse Portrait
Reverse Landscape
Lines per Page
1–255
PCL5 Minimum Line Width
1–30 (2*)
PCLXL Minimum Line Width
1–30 (2*)
A4 Width
198 mm*
203 mm
Auto CR after LF
On
Off*
Auto LF after CR
On
Off*
Tray Renumber
Assign Tray [x]
Assign Manual Paper
Assign Manual Envelope
Tray Renumber
View Factory Defaults
Note: An asterisk (*) next to a value indicates the factory default setting.
Description
Specify the symbol set for each font name.
Note: A symbol set is a set of alphabetic and numeric characters,
punctuation, and special symbols. Symbol sets support the different
languages or specific programs such as math symbols for scientific text.
Specify the pitch for fixed or monospaced fonts.
Note: Pitch refers to the number of fixed‑space characters in a horizontal
inch of type.
Specify the orientation of text and graphics on the page.
Specify the number of lines of text for each page printed through the PCL®
data stream.
Notes:
•
This menu item activates vertical escapement that causes the
selected number of requested lines to print between the default
margins of the page.
•
60 is the U.S. factory default setting. 64 is the international factory
default setting.
Set the initial minimum stroke width.
Set the width of the logical page on A4‑size paper.
Note: Logical page is the space on the physical page where data is
printed.
Set the printer to perform a carriage return after a line feed control
command.
Note: Carriage return is a mechanism that commands the printer to move
the position of the cursor to the first position on the same line.
Set the printer to perform a line feed after a carriage return control
command.
Configure the printer to work with a different print driver or custom
application that uses a different set of source assignments to request a
given paper source.
Show the factory default value assigned for each paper source.
116