Lexmark CX532 User Manual page 212

Maintain the printer
7
Attach the new right cover until it clicks into place.
8
Close door A, and then close door B.
Replacing MarkNet N8450 Wireless Print Server
CAUTION—SHOCK HAZARD: To avoid the risk of electrical shock, if you are accessing the controller
board or installing optional hardware or memory devices sometime after setting up the printer, then turn
the printer off, and unplug the power cord from the electrical outlet before continuing. If you have any
other devices attached to the printer, then turn them off as well, and unplug any cables going into the
printer.
1
Turn off the printer.
2
Unplug the power cord from the electrical outlet, and then from the printer.
3
Using a flat-head screwdriver, remove the controller board shield.
212