Lexmark CX532 User Manual page 244

Troubleshoot a problem
Error codes
58
59
61
62
Error message
Too many trays attached.
Only <x/> tray/s can be
supported.
Incompatible tray [x].
Remove defective disk.
Disk full.
Solution
1
Turn off the printer.
2
Unplug the power cord from the
electrical outlet, and then from
the printer.
3
Remove one or more trays.
4
Connect the power cord to the
electrical outlet, and then turn on
the printer.
CAUTION—POTENTIAL
INJURY: To avoid the risk of fire or
electrical shock, connect the power
cord to an appropriately rated and
properly grounded electrical outlet
that is near the product and easily
accessible.
1
Turn off the printer.
2
Unplug the power cord from the
electrical outlet, and then from
the printer.
3
Remove the indicated tray.
4
Connect the power cord to the
electrical outlet, and then turn on
the printer.
CAUTION—POTENTIAL
INJURY: To avoid the risk of fire or
electrical shock, connect the power
cord to an appropriately rated and
properly grounded electrical outlet
that is near the product and easily
accessible.
Replace the defective storage drive.
Try one or more of the following:
•
Touch Continue to clear the
message.
•
Delete fonts, macros, and other
data stored in the intelligent
storage drive.
•
Install an intelligent storage drive.
244