Saving The Settings (Memory) - Pentax Optio E30 Operating Manual

Saving the Settings (Memory)

The Memory function is for saving the current camera settings when the
camera is turned off.
For some camera settings, the Memory function is always set to O (On)
(the settings are saved when the camera is turned off), while for others
you can choose on or off (to choose whether the settings are saved or
not when the camera is turned off). The items which can be set to O (On)
or P (Off) in the Memory function are shown in the table below. (Items
not listed here will be saved in the selected settings when the camera is
turned off.) If you select O (On), the settings will be saved in the status
they were in immediately before the camera was turned off. If you select
P (Off), the settings will be reset to the defaults when the camera is
4
turned off. The table below also shows whether the Memory default
setting for each item is on or off.
Item
Flash Mode
Drive Mode
Focus Mode
Zoom Position The zoom position set with the Zoom/w/x button (p.64)
MF Position
White Balance
Sensitivity
EV
Compensation
Digital Zoom
DISPLAY
File #
84
The flash mode set with the four-way controller (4) (p.70)
The drive mode set with the four-way controller (2) (p.62,
p.63)
The focus mode set with the four-way controller (5) (p.68)
The manual focus position set with the four-way controller
(23) (p.69)
The [White Balance] setting on the [A Rec. Mode] menu
(p.75)
The [Sensitivity] setting on the [A Rec. Mode] menu (p.78)
The [EV Compensation] setting on the [A Rec. Mode]
menu (p.66)
The [Digital Zoom] setting on the [A Rec. Mode] menu
(p.65)
The LCD monitor information display mode set with the
4/W button (p.67, p.95)
If a new SD Memory Card is inserted when On has been
selected, file numbers are assigned sequentially.
Description
Default
Setting
O
P
P
P
P
P
P
P
O
P
O