Setting The Sensitivity - Pentax Optio E30 Operating Manual

Setting the Sensitivity

You can select the sensitivity to suit the brightness of the surroundings.
4 Sensitivity
Auto Sensitivity is automatically adjusted to between 80 and 320.
80 • The lower the sensitivity, the less noise that affects the image. The
shutter speed will be slower in low light conditions.
160
• Higher sensitivity settings use faster shutter speeds in low light
320
conditions to reduce camera shake, but the image may be affected by
400
noise.
1
Press the 3 button in A mode.
The [A Rec. Mode] menu appears.
2
Use the four-way controller (23) to select [Sensitivity].
3
Press the four-way controller (5).
A pull-down menu appears.
4
Use the four-way controller (23)
to change the sensitivity.
5
Press the 4 button.
The Sensitivity setting is saved.
6
Press the 3 button.
The camera returns to capture status with the current setting.
Sensitivity is set at 80 when Shooting mode is set to y. Other values
cannot be set.
Saving the Sensitivity 1p.84
78
MENU
2, 3, 4
5
1, 6
R A C Y q < I i \ E P D >
Rec. Mode 1/3
7
M Recorded Pixels
Quality Level
AWB
White Balance
Focusing Area
ISO
Sensitivity
AUTO
MENU
Exit Exit Exit
Rec. Mode 1/3
7
M
Recorded Pixels
Quality Level
AWB
White Balance
Focusing Area
ISO
Sensitivity
AUTO
MENU
Cancel
Auto
80
160
320
400
OK
OK OK OK