Messages - Pentax Optio E30 Operating Manual

Messages

Messages such as the following may appear on the LCD monitor during
camera operation.
Battery depleted
Memory card full
Memory card error
Card not formatted
Card locked
Compression error
No image/sound
Movie recording stopped
Deleting
Camera cannot play this
image and sound
Image folder could not
9
be created
Protected
Data being recorded
144
The batteries are exhausted. Replace with new batteries. If
using rechargeable batteries, charge the batteries. (p.22)
The SD Memory Card is full and no more images can be
saved.
Insert a new SD Memory Card or delete unwanted images.
(p.25, p.100)
Change the quality level or recorded pixels of recorded
images and try again. (p.107)
Shooting and playback are impossible due to a problem
with the SD Memory Card. You may be able to display or
copy the images on the card using a PC.
The SD Memory Card you have inserted is unformatted or
has been formatted on a computer or other device and is
not compatible with this camera. (p.126)
The SD Memory Card is write-protected. (p.27)
This message appears when you have exceeded the
capacity limit of the SD Memory Card while taking pictures.
There are no image/sound files on the SD Memory Card.
This message appears when the internal temperature of the
camera has exceeded normal operating limits while
recording a movie.
This message appears when deleting an image or sound
file.
You are trying to play back an image or sound in a format
not supported by this camera. You may be able to play it
back on another brand of camera or your computer.
The largest file number (9999) has been assigned to an
image in the largest folder number (999) and no more
images can be saved. Insert a new SD Memory Card or
format the card. (p.126)
The image or sound file you are trying to delete is protected.
This message appears when you try to switch to Q mode
while an image is still being recorded, or when the protect
setting or DPOF setting is being changed. It disappears
after the image is recorded or the setting is changed.