Pentax Optio E30 Operating Manual page 62

To Register a New Frame
To switch to the screen for registering a frame, press the Green button
in Step 3. You can register frames which you have downloaded from the
internet, etc. When you register a new frame, it replaces one of the
existing three frames in the built-in memory. Before you register a new
frame, copy it first to the SD Memory Card.
When a new frame on the SD Memory Card is registered in the built-
in memory, it replaces one of the existing frames in the built-in
memory. The replaced frame is deleted from the built-in memory.
1
In the frame selection screen, choose the frame you
want to replace and press the Green button.
4
A message appears and the frames on the SD Memory Card that you
can register in the built-in memory appear.
2
Use the four-way controller (45) to choose the frame
you want to register and press the 4 button.
The frame is registered in the built-in memory instead of the frame
selected in Step 1.
60