Optical - Siemens SIMATIC NET SCALANCE XF-200BA Operating Instructions Manual

Connecting up
5.2 Industrial Ethernet
5.2.2

Optical

NOTICE
Failure of the data traffic due to contamination of optical plug-in connections
Optical sockets and plugs are sensitive to contamination of the end face. Contamination can
lead to the failure of the optical transmission network. Take the following precautions to avoid
functional impairments:
• Clean the end face of field-assembled connectors carefully before connecting. No residues
• Only remove the dust caps of optical transceivers and pre-configured cables shortly before
• Close unused optical sockets and plugs as well as pluggable transceivers and slots with the
Note
No light power measurement (PROFINET diagnostics)
The devices do not support diagnostics with light power measurement.
SCRJ connector technology
The attachment to Industrial Ethernet uses SCRJ connector
technology.
LC connector technology
The attachment to Industrial Ethernet uses LC connector
technology (Lucent Connector).
50
of processing may remain on the connector.
connecting the cables.
supplied protective caps.
Operating Instructions, 02/2023, C79000-G8976-C470-08
SCALANCE XF-200BA