Install The Fabric Cover - Graco PRO AA5500SC Instructions And Parts List

Install the Fabric Cover (See Fig. 9 )
1. Install a fabric cover (M) over the front of the gun
and slide it back to cover the exposed tubing and
hoses at the back of the manifold. See Accesso-
ries, page 45, to order cover.
N
Fig. 9
Installation
M
2. Route the exhaust tube (N) outside the cover. This
enables you to monitor the exhaust tube for the
presence of any paint or solvent. See Check for
Fluid Leakage on page 22. Strap down the
exhaust tube to prevent it from moving around.
N
Manifold Back View