Install The Fabric Cover - Graco PRO AA5500SC Instruction Manual

Install the Fabric Cover

1. Install a fabric cover (XX) over the front of the gun
and slide it back to cover the exposed tubing and
hoses at the back of the manifold. See Fig. 11.
YY
Fig. 11
Installation
XX
2. Route the exhaust tube (YY) outside the cover.
This enables you to monitor the exhaust tube for
the presence of any paint or solvent. See Check
for Fluid Leakage on page 24. Strap down the
exhaust tube to prevent it from moving around.
YY
03622
Manifold Back View
03623
308387 15