Table of Contents
Advertisement
1620A "DewK" Thermo-hygrometer
User's Guide
64
instrument can also serve a simple HTML or web page that allows readings to
be observed with a web browser.
Figure 45 Lan Settings
Selecting LAN for the PORT option in the COMM SETTING menu function
presents a window containing the LAN device settings, which include EN-
ABLE, DHCP, ADDRESS, GATEWAY, MASK, COMMAND, and PAGE.
There might be a delay of several seconds, when DHCP is enabled, as the dy-
namic address settings are read from the LAN port device.
The unique MAC number of the instrument's network interface is displayed.
ENABLE, when ON, switches on the LAN. When LAN is enabled, the RF de-
vice will be disabled.
DHCP, when ON, enables dynamic addressing. In this mode, the instrument's
network IP address, gateway, and subnet mask are set automatically by the net-
work server.
ADDRESS sets the network IP address of the instrument to be used when
DHCP is off. When DHCP is on, this shows the dynamic address assigned by
the network server.
GATEWAY sets the default gateway IP address to be used when DHCP is off.
When DHCP is on, this shows the gateway address specified by the network
server.
MASK sets the subnet mask to be used when DHCP is off. When DHCP is on,
this shows the subnet mask specified by the network server.
COMMAND, when ON, enables access to settings using communication com-
mands listed in Section 8. Password-protected settings still require the pass-
word for access. When COMMAND is OFF, settings can be read but not set,
Advertisement
Table of Contents
