Table of Contents
Advertisement
1620A "DewK" Thermo-hygrometer
User's Guide
8.2.3.18
8.2.3.19
8.2.3.20
8.2.3.21
100
Example: DAT:REC:FEED:RHUM1?
Response: 1
The RHUMidity suffix <chn>, specifies the channel (1 or 2). A value of 1 is re-
turned if the humidity recording for the specified channel is enabled. A value of
0 is returned if the humidity recording for the specified channel is disabled.
DATa:RECord:FEED:RHUMidity<chn> <bool>
Sets the state of the humidity recording enable for the specified channel.
Example: DAT:REC:FEED:RHUM1 0
The RHUMidity suffix <chn>, specifies the channel (1 or 2). The <bool> pa-
rameter turns the humidity recording for the specified channel on (1 or ON) or
off (0 or OFF). This command may be password protected (see Section 8.2.10,
Password Commands).
DATa:RECord:FEED:TEMPerature<chn>?
Returns the state of the temperature recording enable for the specified channel.
Example: DAT:REC:FEED:TEMP1?
Response: 1
The TEMPerature suffix <chn>, specifies the channel (1 or 2). A value of 1 is
returned if temperature recording for the specified channel is enabled. A value
of 0 is returned if temperature recording for the specified channel is disabled.
DATa:RECord:FEED:TEMPerature<num> <bool>
Sets the state of the temperature recording enable for the specified channel.
Example: DAT:REC:FEED:TEMP1 0
The TEMPerature suffix <chn>, specifies the channel (1 or 2). The <bool> pa-
rameter turns temperature recording for the specified channel on (1 or ON) or
off (0 or OFF). This command may be password protected (see Section 8.2.10,
Password Commands).
DATa:RECord:FREE?
Returns the recording memory usage.
Example: DAT:REC:FREE?
Response: 3282, 449070
The response indicates the number of bytes remaining and the number of bytes
used, separated by a comma.
Advertisement
Table of Contents
