Table of Contents
Advertisement
8.2.2.6
CALCulate[<chn>]:PARameter[<num>]:AVERage[<type>]:DATA?
Returns the specified statistical calculation for the specified channel.
This is the same as the CALCulate,chn.:PARameter<num>:AVERage<type>?
command (see 8.2.2.4).
8.2.2.7
CALCulate[<chn>]:PARameter<num>:AVERage<type>:TYPE?
Returns the name of the specified statistical type for the specified channel.
Example: CALC1:PAR1:AVER4:TYPE?
Response: "T MAX"
The CALCulate suffix, <chn>, specifies the channel (1 or 2). The PARamenter
suffix, <num>, specifies temperature (1) or relative humidity (2). The AVER-
age suffix, <type>, specifies the statistic: average (1), standard deviation (2),
minimum (3), maximum (4), spread (5), maximum rate (7), or alarm count (8).
Temperature values are in the current temperature unit, C of F.
8.2.2.8
CALCulate<chn>:PARameter<num>:RATE?
Returns the rate calculation for the specified channel in degrees C or F per hour
for temperature or % per hour for relative humidity.
Example: CALC1:PAR1:RATE?
Response: -0.74
The CALCulate suffix, <chn>, specifies the channel (1 or 2). The PARameter
suffix, <num>, specifies temperature (1) or relative humidity (2).
8.2.2.9
CALCulate[<chn>]:PARameter[<num>]:RATE:TIME? [MIN|MAX|DEF]
Returns the rate time span in seconds.
Example: CALC:PAR:RATE:TIME?
Response: 300
Specifying the MIN, MAX, or DEF parameter returns the minimum, maxi-
mum, or default value respectively.
8.2.2.10
CALCulate[<chn>]:PARameter[<num>]:RATE:TIME
<num>|MIN|MAX|DEF
Sets the rate time span for the specified channel in seconds.
Example: CALC:PAR:RATE:TIME 600
Specifying MIN, MAX, or DEF parameter sets the rate time span to the mini-
mum, maximum, or default value respectively. This command may be pass-
word protected (see Section 8.2.10, Password Commands).
8 Digital Communications Interface
Commands
93
Advertisement
Table of Contents
