Table of Contents
Advertisement
The TEMPerature suffix, <chn>, specifies the channel (1 or 2). The <bool> pa-
rameter turns the upper temperature alarm on (1 or ON) or off (0 or OFF). This
command may be password protected (see Section 8.2.10, Password
Commands).
8.2.1.52
ALARm:TEMPurature<chn>:UPPer:LIMit? [MIN|MAX|DEF]
Returns the upper temperature alarm limit for the specified channel in degrees
C or F.
Example: ALAR:TEMP1:UPP:LIM?
Response: 28.00
The TEMPerature suffix, <chn>, specifies the channel (1 or 2). The value re-
turned is always in the current temperature units (C or F). Specifying the MIN,
MAX, or DEF parameter returns the minimum, maximum, or default value
respectively.
8.2.1.53
ALARm:TEMPurature<chn>:UPPer:LIMit <float>|MIN|MAX|DEF
Sets the upper temperature alarm limit for the specified channel in degrees C or
F.
Example: ALAR:TEMP1:UPP:LIM 26.00
The TEMPerature suffix, <chn>, specifies the channel (1 or 2). The <float> pa-
rameter specifies the value for the upper temperature alarm limit. The <float>
value is always in the current temperature units (C or F). Specifying the MIN,
MAX, or DEF parameter sets the upper temperature alarm limit to the mini-
mum, maximum, or default value respectively. This command may be pass-
word protected (see Section 8.2.10, Password Commands).
8.2.1.54
ALARm:TIME:FIRSt?
Returns the time of the first alarm event.
Example: ALAR:TIME:FIRS?
Response: 15,43,13
The response is returned in the format, <hour>,<minute>,<second>.
8.2.1.55
ALARm:TIME:LAST?
Returns the time of the last alarm event.
Example: ALAR:TIME:LAST?
Response: 15,43,19
The response is returned in the format, <hour>,<minute>,<second>.
8 Digital Communications Interface
Commands
91
Advertisement
Table of Contents
