Opening A Unit Door - B.Pro B.PROTHERM 420 KBUH Translation Of The Original Operating Instructions

Opening a unit door

B.PROTHERM 420 KBUH/420 KBRUH/620 KBUH/620 KBRUH
 When setting is complete, wait until the temperature display switches to
the actual temperature.
The last setting of the setpoint temperature is saved automatically.
I The unit continuously saves the setpoint temperature. If the voltage
supply is interrupted, the last set setpoint temperature is active.
I If the voltage supply is interrupted while a new setpoint temperature is be-
ing set, the previous setpoint temperature remains unchanged. The unit
saves a new setpoint temperature when the temperature display returns
to the actual temperature.

Unit disconnected from the power supply
 Open the locking lever until the locking latch disengages (1).
 Swing locking latch out of the way (2).
1.
 Open the unit door.
Caution!
Danger of tipping!
There is a risk of the container tipping over due to the unit door's centre of
gravity if the unit door is opened to an adverse angle.
 Select door opening angle 90° or 270°. Do not use any other door open-
ing angles and provide safety measures to prevent tipping.
– 15 –
2.