Setting The Electronic Pen And Eraser; Setting The Electronic Pen - Panasonic Panaboard UB-8325 Operating Instructions Manual

Setting the Electronic
Pen and Eraser

Setting the Electronic Pen

1
Remove the battery cover on the pen holder,
insert the batteries as shown in the figure, and
re-attach the battery cover.
• Always use "LR03 (AAA size)" (alkaline)
batteries and be sure that their polarity is
properly oriented.
• Do not mix old and new, different type
batteries when replacing batteries.
2
2
Remove the temporal cap, and set the cap
and adaptor to the marker for interactive.
• Securely push the adaptor into the marker
for interactive as far as it will go.
• Do not remove the color identification cap on
the back end of the marker.
Marker for interactive
Remove the
temporal cap.
1
Adaptor
Cap
2
3
Battery cover
1
3
Pen holder
Color identification
cap

Setting the Electronic Pen and Eraser

3
Rotate the pen holder lever to the release
position, insert the marker for interactive, and
then return the pen holder lever to the lock
position.
• Lock the pen holder lever while inserting the
marker all the way into the pen holder until
you hear a buzzing sound.
Detection of the marker color may not work
well unless the marker is inserted fully into
the pen holder.
• Do not set the marker near the Interactive
Panaboard while using the interactive
function as this may appear unnecessary
streaks not written on the computer screen.
2
Inserting
Marker for
interactive
Note
• Press down firmly with the point of the
Electronic Pen on the screen film until you hear
a buzzing sound.
• For precise positioning, keep the Electronic
Pen perpendicularly to the screen during use.
Inclined pen angle will cause the shift of
position.
3
Locking
1 Releasing
Pen holder lever
2 - 3 mm
( 1 / " - 2 / ")
16 16
25