Daily Care and Maintenance
Always turn off the power switch and unplug the power plug when cleaning outside and inside the unit.
■ Cleaning the screen and the unit
■ Caring for the eraser
White or gray
sheet
■ Cleaning the printer head and paper feed roller
If black streaks appear on the copy, clean the printer head and the paper feed roller.
1
Gently wipe the screen film and unit with a water-
dampened cloth that has been thoroughly wrung.
Notes
• Use a neutral kitchen cleaner diluted with water for
hard-to-clean stains. (If you accidentally write on the
screen with an oil-based marker, wipe with a small
amount of ethyl alcohol.)
• Do not use thinner, benzine or cleaners containing
abrasives as this may result in discoloration.
• Do not wipe the screen film with a dry cloth as this may
generate a static charge.
When the erasing surface of the eraser becomes
dirty, hold down the sheet under the top sheet with
your finger and peel off the dirty sheet (white or
gray sheet) by pulling in the direction of the arrow.
Note
• Be sure to peel off only one sheet; white or gray sheet
of the eraser.
• When the eraser becomes thin, make sure that the
corners of the eraser do not strike the screen during
erasing as this may damage the screen.
Push the door open button and open the printer
door.
Door
Open
Button
23