Panasonic Panaboard UB-8325 Operating Instructions Manual page 35

■ Switching the Mode
You can freely switch the Projector mode and the
Whiteboard mode while the Interactive Panaboard
Software is running.
1
Right-click the icon
click Select Mode... in the pop-up menu. In
addition, you can double-click the icon in the
Taskbar.
• The Select Mode window appears.
2
Click Projector or Whiteboard icon, and then
click [OK].
Note
• When switching to the Projector mode, the
calibration screen will not be displayed
automatically after calibration ended
correctly once. Calibrate if necessary.
• When switching to the Whiteboard mode, the
Whiteboard window will be displayed.
■ Setting the Communication Port
Specifies the communication port to communicate
with the Interactive Panaboard.
1
Right-click the icon
click Settings - Communication Port... in the
pop-up menu.
• The Communication Port window appears.
Using the Panaboard in Projector Mode
in the Taskbar and
in the Taskbar and
2
Click [Start...] of the Auto Detection to detect
the communication port connected with the
Interactive Panaboard automatically.
3
Click [OK].
Note
• The COM Port can be selected for older
models of the Interactive Panaboard without
USB port.
35