Control Panel - Panasonic Panaboard UB-8325 Operating Instructions Manual

Part Names and Functions

Control Panel

l
Contrast/Remaining Film
Indicator
Contrast Key
Panel Name
Contrast/
Remaining
Film
Indicator
Contrast
Key
2-Screen
Copy Key
Multi-Copy/
Error
Indicator
Multi-Copy/
Stop Key
Copy Key
Advance
Key
16
2-Screen Copy Key
This lamp indicator notifies the user when the time to replace the thermal transfer
film is approaching (estimated) and of the printing contrast used during copying.
Indicator off:
Indicator on:
Indicator flashing*:
* The flashing indicator will go out after the power is turned off, or the
printer has been opened and closed. (When copying is performed, this
indicator will begin flashing again.)
Each time this key is pressed, the unit will alternate between normal and dark
contrast modes (Normal/Dark).
This key causes the front and back of the screen to be copied on a single
sheet of paper.
This indicator displays the number of copies to be made. The display changes
each time the Multi-Copy/Stop Key is pressed.
Example: 1 → 2 → ··· → 9 → 1 → ···
When an error occurred, a flashing symbol will appear on this display to
indicate the error status. (See page 80.)
When making multiple copies, press this key until the desired number of
copies is displayed on the Multi-Copy/Error Indicator.
This key can also be pressed to stop copying while executing multiple copies.
• The display changes as shown below each time the screen is copied. After
reaching 0, the display will reset to 1.
Example for multiple copies:
5 → 4 → 3 → 2 → 1 → 0 → 1 (Number is counted down.)
This key causes the screen to be copied.
Pressing this key advances the screen from right to left.
Advance Key
Copy Key
Multi-Copy/Error Indicator
Description
Normal printing contrast
Darker than normal printing contrast
Almost time to replace the thermal transfer film
(Note that only about 15 more sheets may be
copied when this indicator starts flashing.)
Replacement film (UG-6001) is separately available
from the dealer where you purchased your unit.
Multi-Copy/Stop Key