Panasonic Panaboard UB-8325 Operating Instructions Manual page 48

Using the Panaboard in Projector Mode
5
Click (REC Stop) in the Desktop Drawing
Tool.
• The Save As window appears.
6
Enter the folder where you want to save the
file and the file name.
• The extension of the file is ".ipb".
7
Click [Save].
Note
• Do not change the Desktop resolution while
recording data using method 1 or method 2.
If changed, the Desktop image will not be
displayed properly in the View window.
• While using method 1 to record data, page
numbers can be verified by
in the Desktop Drawing Tool. Before starting
to record data, the data value is "0" and will
change to "1" when
clicked. The value will then count up for each
page break. When switching the computer
screen being projected onto the screen of
the Interactive Panaboard during a meeting,
begin drawing after adding
and recording the background image of the
new page.
• While using method 2 to record data, the
number of pages can be verified by
(Page No.) in the Desktop Drawing Tool.
Before starting to record data, the data value
is "0" and it will change to "1" when
(REC Start) is clicked. The value will then
count up each time the
clicked.
• A maximum of 50 pages can be stored.
48
(Page No.)
(REC Start) is
(New Page)
(REC Page) is
■ Switching the Desktop Drawing
Tool Display
The Desktop Drawing Tool can be displayed in three
sizes.
• Standard Display:
Shows all buttons.
• Marker Display:
Shows only the buttons used for drawing and
erasing handwritten lines. The buttons for saving
image files or recording IPB documents are not
showed.
• Compact Display:
Use the Compact Display when the Desktop
Drawing Tool covers up too much of the image
behind it. It keeps the part that is hidden to a
minimum.
Switching among their views can be done by clicking
the (Shrinking) or
Standard Display
Note
• Tools cannot be changed in the Compact
Display view.
• During PowerPoint Slide Show, the
Standard Display and Marker Display
views show
icons.
• To disappear the Desktop Drawing Tool,
select a marker
the projected screen with the Electronic Pen
while pressing the pen button.
To display the Desktop Drawing Tool again,
locate the Electronic Pen at the desired
place on the projected screen and press the
projected screen with the Electronic Pen
while pressing the pen button.
(Expansion) buttons.
Marker Display
Compact Display
(Next) and (Previous)
or eraser and press