Table of Contents
Advertisement
Network
The Network sub menu allows you to view and set the IP addresses of the switcher's main
unit and control panel. See
Section 2.2
for network setup.
SE-4000 and CTL refer to the switcher's main unit and control panel respectively.
DHCP: The available network connection modes are DHCP and Static. The default connection
mode is Static (DHCP turned off). The default IP addresses of the main unit and the control
panel are 192.168.100.101 and 192.168.100.102 respectively.
IP Address: Tap to open a numeric keypad then manually enter the IP address if DHCP is
turned off (Static IP mode).
91
Advertisement
Table of Contents
