Table of Contents
Advertisement
6. After successfully importing the logo into the switcher, you will then be able to start
loading the new logo to the buffer. To enable the logo on Preview and Program Out, press
the respective Logo buttons.
6.5 Enabling Logo Animation
The SE-4000's logo animation function places an animated logo layer on your video. Each
animated logo consists of a series of 120 sequential files in bmp, jpg, png or pic format. Every
image file is limited to an aspect ratio of 480x270.
In this section, we will show you how to import animated logo to the switcher, load animated
logo on the switcher as well as enabling the loaded animated logo on Preview and Program
Out.
Note: The SE-4000 has enough storage space for up to 1000 uncompressed animated logo.
Loading an existing Ani-Logo from Memory
The SE-4000 allows the user to load ani logo from the machine's memory to the logo buffer
(Logo 1 or 2), then press either Logo 1 or Logo 2 button to enable the loaded ani logo on both
the Preview and Program Out. Follow the steps outlined below to load the desired ani logo
from memory.
1. Open the ani logo sub menu in the Files menu.
102
Advertisement
Table of Contents
