Datavideo SE-4000 Instruction Manual page 18

192.168.100.102 (Default)
(Subnet Mask: 255.255.255.0)
Note: The main unit, the control panel and the router should be assigned IPs that are in
the same network segment.
After establishing network connection between the main unit and the control panel, simply
turn on the respective power switches. After the switcher has been successfully booted up,
you should see the GUI on the 5 inch LCD screen as shown below. Tap the gear icon located
at the top right corner to open the main menu.
192.168.100.101 (Default)
(Subnet Mask: 255.255.255.0)
192.168.100.1
(Subnet Mask: 255.255.255.0)
18