Mode (V Fade/X Fade)
While working in the Audio-F-Video mode, the audio sources will also change as the video
sources are switched. We can choose how the audio changes sources, whether it be a clean
cut (immediate switch) or some sort of transitioned change (cross fade or fade out & in). To
do this we would need to set up with the following menu options.
X Fade: PGM Audio / PVW Audio cross fade
V Fade: Fade out PGM Audio then fade in PVW Audio
Gain (-60 – 24 dB): adjustment of the PGM audio volume.
Delay (0 – 340 ms): sets the PGM audio delay.
Analog Out
You are also allowed to select a source of audio of your preference and output the selected
audio via Audio OUT. Open the GUI menu and select Audio Analog Out Src where you
may select a source of audio from the following list.
PGM Audio
Follow
Input 1-8
If "Follow" is selected, the audio will enter Audio follow Video mode, i.e. playback of the
PGM audio via Audio OUT
4000 will only play the PGM audio via Audio OUT
select to output one audio component of the 8 inputs via Audio OUT
delay.
Gain (-60 – 24 dB): adjustment of the audio volume at the AUDIO OUT.
Delay (0 – 340 ms): sets the delay of the audio at the AUDIO OUT.
without audio output
78
delay. If "PGM Audio" is selected, the SE-
with audio output
delay. You may also
without audio output