Bajaj GT 125X Service Station Manual page 53

IMPORTANT SOP
Rear top
Rear Bottom
Service Station Manual
• Fit output shaft oil seal.
• Fit clutch cover and magneto cover on crankcase
assembly to avoid any dust entry and cover
crankcase bore with clean lint free cotton cloth.
Note:
- Only pre-fit both covers bolts(2 Nos per cover in
crisscross pattern).
- Do not fit both cover gaskets.
• Place crankcase assembly on jack and align as
shown in photograph.
• Lift the engine assembly and place on cradle
• Fit crankcase rear top & bottom mounting bolts
Note:
Ensure that earthing connection is fitted before
fitting nut and tightening Rear upper Engine
mounting bolt.
• Fit Engine front mounting bolts (03 nos) as shown in photograph.
• Align Leg guard and fit mounting bolt.
49 Service Support - M/C