Bajaj GT 125X Service Station Manual page 123

IMPORTANT SOP
B
Photo of Discover 125 given for illustration
purpose only
Service Station Manual
• Put "CBS Front brake adjustment tool (Part No – 37004354)" between lever front brake
slot & master cylinder slot as shown in photograph.
• If tool moves freely in the slots, take out tool &
adjust tool length by rotating adjuster knob
provided on CBS Front brake adjustment tool till
it tightly fits between two slots.
• Tighten adjuster nut (B) on CBS cable(brake
pedal to master cylinder) by hand till it is not
allowed to rotate
• Take out "CBS Front brake adjustment tool"
• Press brake pedal 2-3 times. Check front wheel
freeness.
• If wheel is not free, loosen adjuster nut(B) on
CBS cable(brake pedal to master cylinder) in
step of half thread till front wheel gets free.
• Confirmation stage :
Use universal vehicle support stand (Part No 37004333 ) in such a way that both wheels
are lifted from ground level.
Rotate both rear & front wheels by hand & apply only rear brake, ensure --
• With normal force, rear wheel gets locked but front wheel still rotates.
• Further increase pressure on rear brake pedal & ensure that front wheel also gets locked
This confirms, CBS cable free play setting is OK.
119
Adjusting tool length by
rotating adjuster knob
Service Support - M/C