Bajaj GT 125X Service Station Manual page 126

IMPORTANT SOP
Service Station Manual
• Take out USB charger slotted nut & spacer.
• Take out USB charger from bracket USB charger.
Assembly :
• Insert USB charger in bracket USB charger.
• Fit spacer as shown in photograph.
• Prefit USB charger slotted nut & tighten using
flathead screwdriver.
• Assemble USB Charger with bracket USB
charger as shown in photograph.
• Connect USB charger coupler to it's mating
coupler.
• Hold handlebar assembly in it's place, assemble handlebar upper holder & USB Charger
with bracket USB charger.
• Prefit handlebar upper holder bolts & tighten to recommended torque (2 – 2.2 Kgf-m).
• Prefit headlamp mounting bolts (4 Nos) & tighten to recommended torque (0.6 – 0.8 Kgf-m).
122 Service Support - M/C