Bajaj GT 125X Service Station Manual page 153

IMPORTANT SOP
Service Station Manual
• Prefit bracket front number plate mounting screws (2 Nos) with metal washers & then
tighten them using phillips head screwdriver.
• Prefit DRL unit mounting screws (4 Nos) & then tighten them using phillips head
screwdriver.
• Fit speedo flap on headlamp assembly. Prefit speedo flap mounting screws (3 Nos) &
then tighten them using phillips head screwdriver.
• Fit bulb in headlamp, lock clip, harness
headlamp coupler on bulb & dust cap
properly.
• Fit harness headlamp coupler & DRL unit
coupler to it's mating coupler in wiring
harness.
• Fit rubber bellow properly to avoid any dust/water entry. All the couplers should be inside
rubber bellow.
149 Service Support - M/C