Bajaj GT 125X Service Station Manual page 107

IMPORTANT SOP
Trim Leg Guard Replacement
Service Station Manual
• Prefit frame grip mounting bolts & tighten to recommended torque (2 – 2.2 Kgf-m)
• Fit holder tail lamp on frame grip as explained in "Wire Holder / Housing Taillamp / Holder
Taillamp Replacement SOP".
• Prefit frame grip (RSA) mounting bolts & tighten to recommended torque (3.2 – 3.8 Kgf-
m)
• Remove trim leg guard mounting screws(2 Nos) with phillips head screw driver.
• Take out collars (2 Nos)
• Split trim leg guard & take out trim leg guard as shown in photograph.
103 Service Support - M/C