Table of Contents
Advertisement
IMPORTANT SOP
• Hold reflector with one hand & fit bulb taillamp.
• Prefit lense screws & tighten them using phillips head screw driver.
• Fit bracket indicator mounting & indicators.
• Fit taillamp assembly on frame. Fit holder taillamp holes on collar.
• Prefit holder taillamp mounting bolts & tighten them to recommended torque.
0.4 – 0.5 Kgf-m
0.8 – 1 Kgf-m
159
Service Support - M/C
Service Station Manual
- Quick Links:
- Engine
Hide quick links:
Advertisement
Table of Contents
