Bajaj GT 125X Service Station Manual page 158

IMPORTANT SOP
Wire Holder / Housing Taillamp / Holder Taillamp Replacement
LH side
Service Station Manual
• Hold the reflector as shown in photograph, fit bulb taillamp.
• Fit lense, prefit lense mounting screws & tighten them using using phillips head screw
driver.
• Remove seat assembly mounting bolts (2 Nos)
with metal washers using 5 mm allen key.
• Lift the seat assembly from rear side & slide in the direction of arrow as shown in
photograph to take out seat assembly.
154
RH side
Service Support - M/C