Bajaj GT 125X Service Station Manual page 14

PDI CHECK SHEET - CT 125X DISC
Check Point What to check
2. Check Points during / after starting the vehicle
RH & LH control switch,
Switch Operation ignition switch, clutch switch
& brake switches
Coupler connection,Horn
Horn
sound.
Head lamp, Tail / stop lamp,
All Bulbs Working Side indicators, Speedo bulb,
DRL
Working of speedometer,
Fuel gauge
Speedometer
Working of all signal
indicators icons (N, Turn
signal, High beam, MIL & B
Logo)
Headlamp
checking
3. Check Points during Test Ride
Gear shifting Smooth operation
Throttle response, Brakes
Driveability
effectiveness- Front & Rear
Engine noise No abnormal noise
4. Visual inspection for dent, scratches, rust etc
5. Clean the vehicle thoroughly before delivery to customer.
Note-
Vehicle FIFO system required with monitoring system.
Vehicles to be dispatched to network only after carrying out PDI activity at Dealership.
Do not drive vehicle in speed sensor dis connected condition & same to be instructed to customer.
Service Station Manual
How to check
Check for smooth
operation & functioning
By hearing
Check functioning.
Fuel gauge-By filling fuel.
By observing speedo
Indications after switching
ON ignition switch.
SOP.
10
Recommendation /
Reference
_
_
_
Speedometer, working to be
checked during / after test
ride
Refer head light focus values
chart.
Focus to be checked with rider
& from a distance of 5 meters.
In case of any issue during
test ride, vehicle to be
attended in workshop.
Workshop Tools , equipment &
Observation consumables required
Funnel for filling petrol
& measuring jar
Head light Focus display
chart with 5m mark.
A.P.Grease,Feeler
gauge,Multimeter.
Service Support - M/C