Operational Instructions - Stamina BODYTRAC GLIDER 1060 Owner's Manual

OPERATIONAL INSTRUCTIONS

USING THE FITNESS METER
POWER ON :
Seat movement or press the button.
POWER OFF :
A u t o m a t i c a l l y s h u t s o ff a f t e r f o u r
minutes of inactivity.
MODE BUTTON:
Press to select display functions, including SCAN, TIME,
COUNT, CALORIES, and TOTAL COUNT.
Press and hold for two seconds to reset all functions to
zero, except TOTAL COUNT.
Functions:
SCAN: Automatically scans each function of TIME, COUNT, CALORIES, and TOTAL COUNT in
sequence with a change every six seconds. Press and release the button until "SCAN"
appears on the display.
TIME: Displays the elapsed time from 1 sec up to 99:59 minutes.
COUNT: Displays the total number of rows you have taken from zero to 9999 rows.
CALORIES: Displays the calorie burned from zero to 9999 Kcal.
The calorie readout is an estimate for an average user. It should be used only as a comparison
between workouts on this unit.
TOTAL COUNT:
Displays the total accumulated number of rows you have taken from zero to 9999 rows.
The total accumulated rows is retained when the meter is turned off, until the battery is
removed.
NOTE:
The meter will shut off automatically after four minutes of inactivity. All function values will be
kept. Press the button and hold it down for two seconds to reset all functions to zero, except
TOTAL COUNT.
HOW TO INSTALL AND REPLACE BATTERIES:
1. Open the Battery Door on the back of the meter.
2. The meter operates with a AA battery (1.5V each), the battery is not
included. Refer to the illustration to install or replace the battery.
NOTE:
1. Rechargeable batteries are not recommended.
2. Ultimate disposal of battery should be handled
according to all state and federal laws and regulations.
3. Do not dispose of batteries in fire.
13
AA Battery