Table of Contents
Advertisement
STORAGE
1. To store the Stamina® Active Aging EasyDecompress Pro, simply keep it in a clean dry place.
2. To move the Stamina® Active Aging EasyDecompress Pro, lift by the back end of the MAIN
FRAME(1) on one end and the FOOTBAR(10) at the other end.
MAINTENANCE
The safety and integrity designed into the Stamina® Active Aging EasyDecompress Pro can only be
maintained when the Stamina® Active Aging EasyDecompress Pro is regularly examined for damage
and wear. Special attention should be given to the following:
1. Verify that all nuts and bolts are present and properly tightened. Replace missing nuts and bolts.
Tighten loose nuts and bolts.
2. Verify that the CAUTION LABEL(84) is in place and easy to read. Call Stamina Products immediately
at 1-800-375-7520 for a replacement CAUTION LABEL(84) if it is missing or damaged.
3. It is the sole responsibility of the user/owner to ensure that regular maintenance is performed.
4. Worn or damaged components must be replaced immediately or the Stamina® Active Aging
EasyDecompress Pro removed from service until repair is made.
5. Only Stamina Products supplied components should be used to maintain/repair the Stamina® Active
Aging EasyDecompress Pro.
6. Keep your Stamina® Active Aging EasyDecompress Pro clean by wiping it off with an absorbent
cloth after use.
OPERATIONAL INSTRUCTIONS
STRETCH SYSTEM
The Stamina® Active Aging EasyDecompress Pro
stretches the back with its one way rack and pinion
engineering. Lie on the Stamina® Active Aging
EasyDecompress Pro with the FOAM PADS(53) holding
your ankles. Pull the HANDLEBARS(4) back and forth as
many times as needed until you feel a gentle stretch. Stop
pulling at the desired position and stay at the stretched
position for a few minutes. Push the HANDLEBARS(4) firmly
toward your head to release the stretch.
Push the Handlebars
toward your head to
Pull the Handlebars back and
forth as many times as needed
to reach the proper stretch.
4
13
release.
4
Advertisement
Table of Contents
