Checking The Edit Points - Panasonic AJ-D850 Operating Instructions Manual

Checking the edit points

1
2
3
Calculating the duration
• When both edit points have been set, the duration between the two edit points.
• When only one edit point has been set, the duration between the set data and the current
tape address.
• When neither edit point has been set, the duration of the previously edited interval.
Press the IN (or OUT) button to check the edit point.
The value of the entered edit point appears on the display.
Press the PREROLL button while holding down the IN (or OUT) button to check the
image at the edit point.
The tape is cued at the edit IN (or OUT) point, and the still picture mode at that point is
displayed.
• The EE mode is established if the TAPE/EE switch has been set to the "EE" position
when "STOP" has been selected for the setup menu No. 313 (AFTER CUE-UP).
Press and hold down the IN and OUT buttons together to check the edit duration.
The duration time appears on the display.
ON VIDEO
AUDIO
OFF
POWER
METER
FULL/FINE
L
MONITOR SELECT
R
LEVEL CH1 CH2 CUE VIDEO
REC
HEADPHONES
PB
PULL
PULL FOR VARIABLE
OPEN
INPUT SELECT
SDI
Y PB PR CMPST SDTI(V&A)
ANALOG AES/EBU USER SET SDI
CH CONDITION
TC/CTL
TC SET
SHIFT ADJ START RESET
W DV SCH CF
VIDEO CH1 CH2 CUE TC
ASSEMBLE INSERT-
PREVIEW A
AUTO EDIT
REVIEW IN – +
PREROLL
TRIM
IN SET OUT
2 1, 3
– 35 –
TC MODE CONTROL
PUSH
TC INT TAPE REMOTE
JOG
REV
UB EXT EE LOCAL
STAND BY PLAYER RECORDER
SERVO REC INHIBIT
EDIT PLAY REC
A
OUT
REW STOP FF
EJECT
AUTO OFF
SHTL
SLOW
FWD
PULL
OPEN