Panasonic AJ-D850 Operating Instructions Manual page 54

Setup menus
Saving a user file
1
2
3
4
5
6
7
8
Automatic loading of user file when the power is turned on
When the user file to be loaded is selected in advance using setup menu item No. A02
(P.ON LOAD), it can be automatically loaded into USER1 when the power is turned on.
Press the MENU button.
While holding down the STAND BY button, press the REW or FF button, and select
USER1.
Turn the search dial and move the cursor (
A01 (SAVE).
SETUP-MENU
<USER1>
803 TELETEXT DET
A00 LOAD
* A01 SAVE
A02 P.ON LOAD
END
While holding down the search button, turn the search dial and select the user file into
which the USER1 contents are to be saved. User files which have been set to the lock
mode are not displayed. When all the user files have been set to the lock mode, the
"LOCKED" display appears and the contents cannot be saved.
Press the SET button. The following messages appear on the menu screen and
counter display.
Menu screen
SETUP-MENU SAVE
USER1
YES<PLAY>/NO<STOP>
The user file number selected in step 4 is displayed in the shaded area.
Press the PLAY button. The contents of the USER1 file are saved in the user file which
was selected in step 4 and stored in the memory. When the STOP button is pressed,
the USER1 menu display appears while the settings remain unchanged.
Turn the search dial and move the cursor (
except No. A00 (LOAD) and No. A01 (SAVE).
Press the SET button. The USER1 settings are now stored in the memory.
If the USER1 settings are not going to be stored in the memory, do not press the SET
button but press the MENU button.
*
) on the menu screen to setup item No.
MENU
NO.A00 - 0000
AUTO
USER2
USER2
OFF
USER2 OK?
*
) on the menu screen to any setup item
– 54 –
Counter display
TCR 00:00:00:00
SETUP SAVE U-1 U-2