Setup (Default Settings) - Panasonic AJ-D850 Operating Instructions Manual

Setup (default settings)

The unit's major settings are performed by making selections on menus.
The setting menus appear on the TV monitor when the TV monitor and VIDEO OUT 3
connector in the unit's connector area are hooked up.
Changing the settings
1
2
3
4
5
6
<Note>
•
When the RESET button is
pressed to return to the
factory settings, the factory
settings are restored only
for the user file currently
being used and other user
files are not affected.
•
The changed SYSTEM
menu contents are recorded
even if the MENU button is
pressed.
Press the MENU button.
The setup menu appears on the TV monitor and setup menu No. appears on the
counter display. (If the setup has already been performed, the screen showing the
changes made last will appear.)
Rotate the search dial and select the item to be set.
The cursor ( * ) on the menu screen moves and the item No. on the display flashes.
• When the dial is rotated clockwise, the item No. is incremented from 001 002
003 004 and so on; when it is rotated counterclockwise, the item No. is
decremented.
• The search dial should be used in jog mode if at all possible.
• Hold down the PLAY button and press the FF (next major item) or REW (previous
major item) buttons to select the menu by major item.
While holding down the search button, rotate the search dial at the position where the
change is to be made.
The setting No. now flashes.
When the dial is rotated clockwise, the setting value is incremented; when it is rotated
counterclockwise, it is decremented.
Release the search button when the setting is completed.
The setting value on the menu screen and display flashes.
• During the SHTL mode, the item moves if the search dial is not at the STILL position.
Repeat steps 2 through 4 to change another item.
Press the SET button.
The changes are now stored in the memory.
• To return the items to the settings established before the changes were made, press
the MENU button.
To return the setup settings to the factory (default) settings, press the RESET button
while the menu is displayed. The following message will now appear:
SETUP-MENU INIT SET
YES<PLAY>/NO<STOP>
When the PLAY button is pressed, the factory settings
are restored.
ON
OFF
POWER
METER
FULL/FINE
L
MONITOR SELECT
R
LEVEL CH1
HEADPHONES
PULL
OPEN
INPUT SELECT
SDI
VIDEO Y PB PR CMPST SDTI(V&A)
AUDIO ANALOG AES/EBU USER SET SDI
CH CONDITION
TC SET
SHIFT ADJ START
W DV SCH CF
CH2 CUE VIDEO
VIDEO CH1
ASSEMBLE INSERT-
REC
PREVIEW A
AUTO EDIT
REVIEW PREROLL IN
PB
IN
PULL FOR VARIABLE
ENC VIDEO CHROMA
CONTROL LEVEL LEVEL
PRESET PRESET
REMOTE
LOCAL
MANUAL MANUAL
– 50 –
4 3
TC MODE CONTROL
TC INT TAPE REMOTE
JOG
TC/CTL
UB EXT EE LOCAL
STAND BY PLAYER RECORDER
RESET
SERVO REC INHIBIT
EDIT PLAY REC
CH2 CUE TC
A
– + OUT
TRIM
REW STOP FF
SET OUT
SET UP HUE SYNCHRO- REC MENU SET DIAG
CF NIZE TC
INHIBIT
PRESET PRESET
8F/4F ON REGEN REC RUN
ON
MANUAL MANUAL
2F OFF PRESET FREE RUN OFF
1 6
EJECT
AUTO OFF
PUSH
SHTL
SLOW
REV FWD
PULL
OPEN
2