Panasonic AJ-D850 Operating Instructions Manual page 59

USER menu
<OPERATION>
No.
100
101
102
103
104
105
106
The underline on the setting item denotes the initial setting.
Item Setting
Superimposed Superimposed
No.
display display
SEARCH 0000
ENA 0001
SHTL MAX 0000
0001
0002
FF. REW 0000
MAX 0001
0002
AUDIO 0000
MUTE 0001
REF 0000
ALARM 0001
AUTO EE 0000
SEL 0001
0002
PLAY 0000
.
.
DELAY .
0015
– 59 –
DIAL This selects the direct search dial operation.
0: For direct search dial operations.
KEY
1: Operation is not transferred to the search mode unless the
search button is pressed.
16 This sets the maximum speed for shuttle operations.
0: 16 normal speed
32
1: 32 normal speed
60
2: 60 normal speed
<Note>
During DV or DVCAM format, the maximum speed is 32
normal speed even when 60 is selected.
32 This sets the maximum speed for FF and REW operations.
0: 32 normal speed
60
1: 60 normal speed
100
2: 100 normal speed
<Note>
During DV or DVCAM format, the maximum speed is 32
normal speed regardless of this setting.
OFF This sets the status until the audio signal is output when
operation switches from the stop or search modes to the play
ON
mode.
0: The time until the audio is output is shortened.
1: The audio is output after the status stabilizes.
<Note>
When set to 0 (OFF), the sound in the initially output part is
incomplete. Therefore, this setting is not recommended for
broadcasts.
OFF This selects whether to warn the operator when the
REF.VIDEO signal has not been connected.
ON
0: Warning is not given.
1: Warning is given by the flashing STOP lamp.
S/F/R
This selects the VTR mode in which the EE status is
established when the TAPE/EE switch is set to EE.
STOP
0: EE status is established in the STOP, FF or REW mode.
BLACK
However, EE status is always established in EJECT mode
regardless of the TAPE/EE switch setting.
1: EE status is established only in the stop mode. However,
EE status is always established in EJECT mode regard-
less of the TAPE/EE switch setting.
2: EE status is established only in the stop mode. However,
depending on TAPE/EE switch setting EJECT mode is as
follows:
TAPE/EE switch EE:
TAPE/EE switch TAPE: BLACK status for video
This set the play delay time in frame increments.
0
.
.
.
15
Description
EE status
MUTE status for audio