Facsimile Features; Sending Documents; General Description; Memory Transmission - Panasonic WORKIO DP-2310 Operating Instructions Manual

Facsimile Features

Sending Documents

General Description

You can choose either Memory or Direct Transmission.
Use Memory Transmission if:
• You want to send the document(s) to multiple stations.
• You have to retrieve the document immediately.
• You want to take advantage of Multi-access design.
• You want to take advantage of Batch Transmission.
Use Direct Transmission if:
• The memory is full.
• You want to send the document(s) immediately.
Use Voice Mode Transmission if:
• You want to send the document(s) after listening to a voice prompt.
• You want to send the document after talking with the other party. (Requires an External Telephone)

Memory Transmission

Your machine quickly stores the document(s) into the machine's memory.
Then, starts to dial the telephone number.
If the transmission fails, your machine will re-transmit the remaining unsuccessful page(s) automatically.
1
Store document(s)
in memory
1. While storing, the File Number of the document being stored is shown at the upper right corner
NOTE
of the display. It is also printed on the Communication Journal (COMM. JOURNAL),
Transaction Journal and the File List. The percentage of memory used is shown on the lower
right corner of the display after each page is stored.
2
Transmit
A
3
Receive
Destination A
Destination B
Memory Transmit
Page 01
5551234
A
A
No.026
0%
27